Shop Now
From Our Blog
-
Weldclass Nominate-a-Charity Draw 2024
It's on again... -
Do Mobile Welding Fume Extractors Work
The pros and cons of mobile fume extractors
MIG / Stick / TIG Welder - FORCE 255MST*
Now available with 7-year warranty.
The Force 255MST* delivers an impressive 250A @ 35% output, plus a host of impressive features to make your job easier. Work in manual mode, or synergic (select the material and thickness, and the machine takes care of the settings). PFC technology means the 255MST is; extremely power efficient, delivers higher duty cycle, can be used with long extension leads (up to 100m) and is a great choice for use with generators where required. Stick/MMA & lift-TIG capability, job memory, 4-roll geared drive system, fan-on-demand to reduce dust intake, spool gun ready, advanced Stick and TIG functions... and a stack of other features too numerous list here! Comes with 4m MIG torch, 2-stage gas-saving regulator, full set of drive rollers for gas, gasless & aluminium wire, 4m earth and stick leads, 15A plug fitted, and cable strap system. Maximum recommended MIG welding capacity of 12mm (mild steel).
*Also known as Weldforce 255MST - read more.
The Force 255MST* delivers an impressive 250A @ 35% output, plus a host of impressive features to make your job easier. Work in manual mode, or synergic (select the material and thickness, and the machine takes care of the settings). PFC technology means the 255MST is; extremely power efficient, delivers higher duty cycle, can be used with long extension leads (up to 100m) and is a great choice for use with generators where required. Stick/MMA & lift-TIG capability, job memory, 4-roll geared drive system, fan-on-demand to reduce dust intake, spool gun ready, advanced Stick and TIG functions... and a stack of other features too numerous list here! Comes with 4m MIG torch, 2-stage gas-saving regulator, full set of drive rollers for gas, gasless & aluminium wire, 4m earth and stick leads, 15A plug fitted, and cable strap system. Maximum recommended MIG welding capacity of 12mm (mild steel).
*Also known as Weldforce 255MST - read more.
WF-06167 134.31
View 255MST Support & FAQ Articles
FUNCTIONS:
- MIG (Gas / Gasless)
- Stick / MMA
- TIG (Lift-Arc)
AT A GLANCE:
- 250A max MIG output @ 35% duty cycle
- Weld up to 12mm Mild Steel (max MIG capacity)
- Fitted with 15A** 240V plug
KEY FEATURES:
- Industry-first 7-year warranty*
- Power Factor Correction (PFC) - reduced power draw, increased duty-cycle, ideal for long leads & generators
- Manual or Synergic (enter material type & thickness and machine will set parameters automatically)
- 20+ Pre-set Programs - for different materials
- Job Save - store custom settings for up to 20 jobs
- Geared 4-Roll Wire Drive System - for super reliable wirefeeding
- Takes 5kg (D200mm) or 15kg (D300mm)spools
- Spool Gun Ready
- Generator Compatible - min 13kva, ideal 15+kva
- Fan-on-Demand - reduces dust intake
- Stressed-Tested - to 440V & over-specified componentry for reliability
- Robust & Portable, weighs 26kg
- Optional Stick/MMA VRD function (Supplied as standard with VRD NOT active. VRD can be activated by an authorised agent/distributor if required)
- MIG functions & adjustments include: Inductance, Soft Start, Burnback, Post-Gas Time, 2T/4T Trigger, Spot/Stitch Time
- Stick/MMA functions & adjustments include: Hot-Start %, Arc-Force %
- TIG functions & adjustments include: Trigger & Remote Amperage Control on the torch, Post-Gas Time, Slope-Down Time
INCLUDES:
- MIG Torch 4m BZL 25
- Earth Lead H/Duty 4m
- Stick Lead H/Duty 4m
- Gas Regulator
- Driver Roller for 0.6/0.8mm steel/solid wire
- Driver Roller for 0.9/1.2mm steel/solid wire
- Driver Roller for 0.8/0.9mm gasless wire
- Driver Roller for 1.0/1.2mm aluminium wire
- Cable Retaining Strap
- Long Power Input Lead 3m
OPTIONAL ACCESSORIES:
Steve - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Really good fine adjustment of voltage & feed speed when you make a fine adjustment to the voltage it can be seen in the weld making it easy to get you're settings perfect.
19/11/24 13:04
Jamie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
I Brought the Weldclass 255 MST for at home projects, and wanted to buy the largest amperage 240 Volt Machine I on the market. Originally when I brought it there was an issue with the internal gas plumbing but I rang the Weldclass distributor at Tamworth and Tony was very friendly and fixed the issue quickly for me. Just an internal clamp that was loose. Since then I’ve used it a number of times. I love the build quality of the machine, It’s very heavy and durable, seems like all the internal components look very well engineered. I like how easy it is program for the type of Mig Welding that you are doing and takes the guess work out. The welding gun is also very heavy and durable. Love the product Jamie
17/07/24 17:46
Jaimie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Excellent at 1st but its had an issue so back in for a check up. Sure it’ll be fine I also have a weld class 395 mig and a 205 small unit i bought for our son.
28/05/24 16:37
Robert - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
Absolutely awesome machine gets used every day at my station does most jobs pretty impressed by it
20/09/23 10:01
Ian - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments:
I was very pleased with the customer service l received when purchasing this product. The Trade Tool team were courteous and prompt in obtaining this welder for me.
15/08/23 14:12
Redback - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Fantastic machine, Great quality Easy to use 07/06/23 10:39 AM
SCOTT - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments: 2ND MACHINE
04/04/23 4:01 PM
Garth - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 5 Comments:
Perfect 07/04/22 8:33 PM
Garth - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 5
Comments: Perfect
07/04/22 8:33 PM
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great machine really happy welds beautiful
02/11/22 5:05 PM
Nathan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Still learning the ins and outs but after using a cig weld 135 for years this is a really good unit especially with the gasless mig wire found the auto function really good and looks really well made very happy.
23/10/22 16:23
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great so far
12/10/22 14:02
Jason - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: The quality of the machine and parts is what got me interested and I'm excited to test it out. I like good quality equipment and happy to pay for it.
06/07/22 03:56
Kayla - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its a great Welder! Perfect upgrade for our business. Bought in kit which was very convenient! 28/02/22 18:21
Alan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Very happy, stable arc, synergic function works well.
10/11/21 01:37
Derek - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very Excited to use this machine
01/11/21 17:37
John - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
VG 25/10/22 11:55 AM
Nathan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Still learning the ins and outs but after using a cig weld 135 for years this is a really good unit especially with the gasless mig wire found the auto function really good and looks really well made very happy.
24/10/22 10:40 AM
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Great so far
13/10/22 8:02 AM
Mick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Easy to operate one of the best welders I’ve used
07/09/22, 1:17 pm
Graham - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
Weldclass is world class in my books.
08/09/22, 2:17 pm
Graham - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
I wanted a heavy duty professional unit that is why I purchased it.
30/08/22, 1:47 pm
Kevin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
It’s very compact and simple to use
06/01/22 12:10 AM
Brendon - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I have just purchased the machine 2 hrs ago and have had a quick play with it and so far it looks perfect for our application
29/09/21 12:05 AM
Greg - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Easy to use.
19/08/21 4:15 PM
Peter - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments: Seems to work okay so far will see if it can be as reliable as my old unit
01/08/21 3:48 AM
Christopher - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: 100% I love this product and will recommend it to everyone! 07/07/21 7:46 PM
Thomas - NSW How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: So far happy with the machine, welds great! 01/07/21 12:26 AM
Tjeerd - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Good still getting used to machine
28/06/21 2:23 AM
Thomas - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excellent service
02/06/21 3:00 AM
Michael - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Absolutely love it. Didn’t realise how bad my old welder was until I used this.
16/04/21 2:58 AM
Chelsea - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 1
Comments: The welder has done nothing but break, wire constantly getting stuck in the tips and liner
12-Feb-2020
**Response from Weldclass Team**
Chelsea, sorry to hear about your experience. Can we suggest that you look at this MIG Welder Wire Feed Troubleshooting Guide. The cause of wire jamming will almost certainly be addressed in this article.
Dan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Haven't actually had a chance to use the machine yet.
07-Feb-2021
Andrew - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Very happy with the machine. Purchased with Spoolgun for Aluminium. Only problem so far was its bigger than the Transmig 175 so doesn't fit on the welding trolley.... :)
05-Feb-2021
Doug - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very well built machine. Extremely happy with it. Ordered the machine in December 2020 but it only arrived in Alice first week of Jan 2021.
22-Jan-2021
Colin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great welder, should do all my jobs with ease. I like the 4 roller wire feed.
10-Jan-2021
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: All fine so far
23-Dec-2020
Robert - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: A little bit complicated to set up. Need an easy reference guide to settings to use on certain size material.
16-Dec-2020
Peter - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its perfect for what i need and is so easy to use.
27-Nov-2020
Gary - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Coming from a old school Mig, the machine with the computer control of weld via the synergic settings is taking some getting used to. I feel like just using program 0 so that I can set up as per original tech, but am persevering with the other setups. General quality seems to be good, but haven't used it much so can't say about longevity etc. The wire feed seems to be good quality and robust and was a factor that I considered in the purchase of the unit. The setting of the unit to restrict the machine to 200 A is a good feature, but perhaps it should be set on by default, as my machine powered up with the full 250A capacity and although I do have a 32 A feed, the supplied lead is only certified for 15A afaik.
06-Oct-2020
Donald - VIC
I believe the machine will be ideal for my needs
18-Jan-2020
Emma - QLD
Love It!
25-Oct-2019
Joe - QLD
Great so far
20-Sept-2019
David - QLD
Great unit with loads of features
11-Sept-2019
Zadok - QLD
Looks good, nice and portable. Keen to see how it goes on a generator.
22-Jun-2019
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Really good fine adjustment of voltage & feed speed when you make a fine adjustment to the voltage it can be seen in the weld making it easy to get you're settings perfect.
19/11/24 13:04
Jamie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
I Brought the Weldclass 255 MST for at home projects, and wanted to buy the largest amperage 240 Volt Machine I on the market. Originally when I brought it there was an issue with the internal gas plumbing but I rang the Weldclass distributor at Tamworth and Tony was very friendly and fixed the issue quickly for me. Just an internal clamp that was loose. Since then I’ve used it a number of times. I love the build quality of the machine, It’s very heavy and durable, seems like all the internal components look very well engineered. I like how easy it is program for the type of Mig Welding that you are doing and takes the guess work out. The welding gun is also very heavy and durable. Love the product Jamie
17/07/24 17:46
Jaimie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Excellent at 1st but its had an issue so back in for a check up. Sure it’ll be fine I also have a weld class 395 mig and a 205 small unit i bought for our son.
28/05/24 16:37
Robert - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
Absolutely awesome machine gets used every day at my station does most jobs pretty impressed by it
20/09/23 10:01
Ian - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments:
I was very pleased with the customer service l received when purchasing this product. The Trade Tool team were courteous and prompt in obtaining this welder for me.
15/08/23 14:12
Redback - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Fantastic machine, Great quality Easy to use 07/06/23 10:39 AM
SCOTT - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments: 2ND MACHINE
04/04/23 4:01 PM
Garth - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 5 Comments:
Perfect 07/04/22 8:33 PM
Garth - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 5
Comments: Perfect
07/04/22 8:33 PM
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great machine really happy welds beautiful
02/11/22 5:05 PM
Nathan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Still learning the ins and outs but after using a cig weld 135 for years this is a really good unit especially with the gasless mig wire found the auto function really good and looks really well made very happy.
23/10/22 16:23
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great so far
12/10/22 14:02
Jason - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: The quality of the machine and parts is what got me interested and I'm excited to test it out. I like good quality equipment and happy to pay for it.
06/07/22 03:56
Kayla - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its a great Welder! Perfect upgrade for our business. Bought in kit which was very convenient! 28/02/22 18:21
Alan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Very happy, stable arc, synergic function works well.
10/11/21 01:37
Derek - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very Excited to use this machine
01/11/21 17:37
John - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
VG 25/10/22 11:55 AM
Nathan - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Still learning the ins and outs but after using a cig weld 135 for years this is a really good unit especially with the gasless mig wire found the auto function really good and looks really well made very happy.
24/10/22 10:40 AM
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Great so far
13/10/22 8:02 AM
Mick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Easy to operate one of the best welders I’ve used
07/09/22, 1:17 pm
Graham - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
Weldclass is world class in my books.
08/09/22, 2:17 pm
Graham - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
I wanted a heavy duty professional unit that is why I purchased it.
30/08/22, 1:47 pm
Kevin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
It’s very compact and simple to use
06/01/22 12:10 AM
Brendon - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I have just purchased the machine 2 hrs ago and have had a quick play with it and so far it looks perfect for our application
29/09/21 12:05 AM
Greg - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Easy to use.
19/08/21 4:15 PM
Peter - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments: Seems to work okay so far will see if it can be as reliable as my old unit
01/08/21 3:48 AM
Christopher - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: 100% I love this product and will recommend it to everyone! 07/07/21 7:46 PM
Thomas - NSW How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: So far happy with the machine, welds great! 01/07/21 12:26 AM
Tjeerd - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Good still getting used to machine
28/06/21 2:23 AM
Thomas - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excellent service
02/06/21 3:00 AM
Michael - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Absolutely love it. Didn’t realise how bad my old welder was until I used this.
16/04/21 2:58 AM
Chelsea - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 1
Comments: The welder has done nothing but break, wire constantly getting stuck in the tips and liner
12-Feb-2020
**Response from Weldclass Team**
Chelsea, sorry to hear about your experience. Can we suggest that you look at this MIG Welder Wire Feed Troubleshooting Guide. The cause of wire jamming will almost certainly be addressed in this article.
Dan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Haven't actually had a chance to use the machine yet.
07-Feb-2021
Andrew - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Very happy with the machine. Purchased with Spoolgun for Aluminium. Only problem so far was its bigger than the Transmig 175 so doesn't fit on the welding trolley.... :)
05-Feb-2021
Doug - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very well built machine. Extremely happy with it. Ordered the machine in December 2020 but it only arrived in Alice first week of Jan 2021.
22-Jan-2021
Colin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great welder, should do all my jobs with ease. I like the 4 roller wire feed.
10-Jan-2021
David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: All fine so far
23-Dec-2020
Robert - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: A little bit complicated to set up. Need an easy reference guide to settings to use on certain size material.
16-Dec-2020
Peter - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its perfect for what i need and is so easy to use.
27-Nov-2020
Gary - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Coming from a old school Mig, the machine with the computer control of weld via the synergic settings is taking some getting used to. I feel like just using program 0 so that I can set up as per original tech, but am persevering with the other setups. General quality seems to be good, but haven't used it much so can't say about longevity etc. The wire feed seems to be good quality and robust and was a factor that I considered in the purchase of the unit. The setting of the unit to restrict the machine to 200 A is a good feature, but perhaps it should be set on by default, as my machine powered up with the full 250A capacity and although I do have a 32 A feed, the supplied lead is only certified for 15A afaik.
06-Oct-2020
Donald - VIC
I believe the machine will be ideal for my needs
18-Jan-2020
Emma - QLD
Love It!
25-Oct-2019
Joe - QLD
Great so far
20-Sept-2019
David - QLD
Great unit with loads of features
11-Sept-2019
Zadok - QLD
Looks good, nice and portable. Keen to see how it goes on a generator.
22-Jun-2019
Related Products
-
Australia's number one Gasless (self-shielded) 'MIG' welding wire for welding without gas. PLATINUM GL-11® is the first choice of welders across Australia and beyond. Seriously smooth arc, easy-to-use, low spatter, low fume, easy de-slagging, multi-pass and all-positional. Great for mild and galvanised steels. E71T-11 classification. Available in 0.8mm, 0.9mm, 1.2mm, 1.6mm - 4.5kg and 15kg spools.
PLATINUM GL-11® wire is used and reviewed by thousands of Aussie welders every year, with an average rating of 9.67 out of 10. Click 'reviews' tab below to read feedback from other users. -
BZL-25 series Spool Guns to suit various Weldclass MIG welders. Max 230A capacity, takes Binzel 25 style front-end torch consumables.
-
TIG Torches to suit specific Weldclass welders. Includes remote amperage adjustment on handle, and highly flexible cable with soft cover. See details below for more information on each torch.
-
Now available with 7-year warranty.
The Force 205MST* is not your standard portable multi-function MIG. Boasting 200A @ 30% output, this unit has the grunt and an impressive range of features to get the job done and save time and money. Work in manual mode, or synergic (select the material and thickness, and the machine takes care of the settings). PFC technology means the 205MST is incredibly power efficient, giving it more duty cycle and making it an excellent choice for use on long extension leads (up to 100m) and/or use on generators. Stick/MMA & lift-TIG capability, job save & recall, geared drive system, fan-on-demand to reduce dust intake, spool gun ready, advanced Stick and TIG functions... and too many other features to list here! Comes with 4m heavy-duty Euro-fit MIG torch, 2-stage gas-saving regulator, 0.8/0.9mm drive rollers for gas, gasless & aluminium wire, 4m earth and stick leads, 15A plug fitted, cable strap. Maximum recommended MIG welding capacity of 10mm (mild steel).
*Also known as Weldforce 205MST - read more. -
Robust welding trolley - the ideal platform for your portable welder or plasma cutter. Now available with 7-year warranty. Outrigger caster wheel design for greater stability. Large upper tray with open-front design accommodates small or large machine, including most portable MIG welders up to 250A. Overall size L1,000 x H720 x W420mm including axle. Size of top tray L700 x W275mm. Includes 2 gas bottle chains and 2 lead/cable hanger hooks.
-
Welding lead / cable assemblies - including earth leads and electrode holder leads (work leads) to suit a range of different welders. Pre-assembled, ready to plug in and weld. Made with high-quality double-insulated cable and heavy-duty accessories, including earth clamps with solid brass jaws. Available as individual earth lead to suit all types of welders (including MIG, TIG & Stick), and individual electrode holder leads for stick welders.
-
Now available with 7-year warranty.
The Force 290MST* offers unbeatable grunt from single-phase power, ideal for use where higher output is desired but 3-phase power supply is not available. With a maximum output of 290A @ 55% there's plenty of power to tackle production jobs with wires up to 1.2mm. Available as a stand-alone compact / portable machine, or can be optioned with the WF114 separate wire feeder unit either with initial purchase or as an add-on later if/when required. Features include: Easy-to-use controls (synergic or manual), 4-roll geared drive system, Job save, Spool Gun ready, and more. See below for package options.
*Also known as Weldforce 290MST - read more. -
Trolley & base options to suit Weldclass industrial MIG welders, including 255MST, 290MST, 350MST & 395MST
