Shop Now
From Our Blog
-
Weldclass Nominate-a-Charity Draw 2024
It's on again... -
Do Mobile Welding Fume Extractors Work
The pros and cons of mobile fume extractors
Oxy & TIG Welding and Brazing Rods Australia
Check out the range of Oxy Brazing Rods & TIG Welding Filler Rods, available from Weldclass distributors across Australia.
Brazing & Filler Rod Selection Chart
1 to 8 of 8 results
-
ER70S-6 grade filler wire for general purpose TIG welding of steel. Contains manganese and silicon deoxidizers. Good for poor fit-up and/or where impurities such as rust and scale are present. Also suitable for Oxy/Acetylene fusion welding of mild steel. Available in 1.6mm & 2.4mm in 1kg handy packs.
Brazing & TIG Rod Selection Guide -
316L Stainless-Steel filler rod for TIG welding common 300 series stainless steels, such as 301, 302, 304, 304L, 316, 316L also 409, 444 and 3cr12. Available in 1.6mm & 2.4mm in 5kg bulk packs or 1kg handy packs.
Brazing & TIG Rod Selection Guide -
5356 Aluminium filler rod for TIG welding a wide range of aluminium alloys, general aluminium fabrication and repair. Available in 1.6mm, 2.4mm & 3.2mm in 5kg bulk packs or 0.5kg handy packs.
Brazing & TIG Rod Selection Guide -
Manganese-Bronze brazing alloy rod for general purpose Oxy braze welding of steel, cast iron, malleable iron, copper, copper alloys. Is similiar to & can be used in place of Tobin Bronze for many applications. Melting range approx. 870-900c. AWS Classification A5.8 RBCuZn-C. (Not suitable for copper pipes carrying hot water or salt water).
Brazing & TIG Rod Selection Guide -
Nickel Bronze (Nickel Silver) brazing alloy rod for high strength Oxy braze welding of steel, cast iron, malleable iron, fusion welding of similar copper alloys & build up of worn ferrous components, eg gear teeth. Good wear resistance. Melting range approx. 920-940c. AWS classsification A5.8 RBCuZn-D.
Brazing & TIG Rod Selection Guide -
Economical 2% Silver "phos copper" brazing alloy rod for joining copper to copper (with or without flux) & copper to low zinc brass (flux required). Popular for copper pipe, plumbing fittings, hot water tanks. Melting Range (approx): 645-820°C. AWS Specification A5.8-B CuP6.
Brazing & TIG Rod Selection Guide -
15% Silver "phos copper" brazing alloy rod for joining copper to copper (with or without flux) & copper to brass (flux required). Commonly used in plumbing & HVAC applications; copper pipe, hot water tanks, plumbing fittings, etc. Excellent for gap-filling where close fit-up does not exist, and where thermal expansion and service vibration are involved. When heated above liquidus temperature will flow into tight connections. Highest joint ductility and strength in HVAC-R applications. Melting Range (approx): 645-800°C. AWS Specification A5.8-B CuP5.
Brazing & TIG Rod Selection Guide -
Popular 45% silver brazing alloy rod for general purpose, high-strength brazing of all ferrous and non ferrous metals, including steel, stainless-steel, copper, brass, nickel, etc. High fluidity & rapid capillary flow, good choice where parts have close fit up. Melting Range (approx): 640-680°C.
Brazing & TIG Rod Selection Guide
1 to 8 of 8 results