Shop Now
From Our Blog
-
Weldclass Nominate-a-Charity Draw 2024
It's on again... -
Do Mobile Welding Fume Extractors Work
The pros and cons of mobile fume extractors
Electrodes - PROMAX GP (General Purpose)
The Weldclass Promax GP is an easy-to-use, all-positional welding rod for mild & galvanised steels, supplied in a 1kg re-usable convenience pack to keep electrodes in good condition. Very smooth arc, easy re-striking & easy slag removal. Fast-freezing slag formula, for welding in all positions including vertial down. Tolerant to dirty materials and poor fit-up. Available in 2.0mm, 2.6mm & 3.2mm.
If a more forceful arc is desired, and for larger volume applications, we recommend the best-selling Weldclass Platinum 12V electrode.
Stick Electrode Selection Chart
If a more forceful arc is desired, and for larger volume applications, we recommend the best-selling Weldclass Platinum 12V electrode.
Stick Electrode Selection Chart
Also Known As:
General purpose / Welding Rod for steel / Stick Electrode / Stick Welding Rod / MMA Electrode / MMAW Electrode
Disclaimer:
Any product application information on this web page is presented as "typical" and an indicative guide only, without guarantee or warranty, and Weldclass expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as an official recommendation for any welding condition or technique by Weldclass. The correct product(s), settings and techniques will vary in each application and users should conduct their own research to determine the correct product and method to use in their situation. E.&O.E.
WC-06297 24.02
KEY FEATURES:
- Smooth Arc, Easy Striking, Easy-to-remove Slag
- User Friendly: Tolerant to Dirty / Rusty Steel & Poor Fit Up
- All-Positional: Fast-Freezing Slag for fillet & butt welding in All Positions, including Vertical Down
- Convenient 1kg re-usable pack
APPLICATION INFO:
- Ideal General Purpose electrode for fabrication, repair, fencing, light structural & more
- For Mild steel, Galvanized, Plate, Sheet & Tubular/RHS Steel
OPERATING INFO:
- Polarity: DC± or AC± (electrode + or -)
- Positions: All-positional
- Minimum recommended OCV (open circuit voltage): 45V
CLASSIFICATIONS:
- AWS specification A5.1 E6013
- AS/NZS 4855 – B-E43 13 A (Previous Classification AS/NZS 1553.1 E4112-0)
TYPICAL PROPERTIES OF ALL WELD METAL:
- Tensile strength 490 Mpa (N\mm2)
- Yield strength 430 Mpa (N\mm2)
- Elongation 26%
- CVN Impact 82J @ 0c
- Composition %: C0.07 Mn0.45 Si0.41 P0.018 S0.010
FAQs:
- How many rods per pack/KG ?
- 2.6mm = approx. 50 rods per KG
- 3.2mm = approx. 33 rods per KG
RELATED INFO & ARTICLES:
- The Weldclass stick welding electrode Handy Pack Range
- The MMA "Stick" Welding Process - your questions answered
- What is Open Circuit Voltage (OCV) ?
- MMA "Stick" Welding: What is Hot Start, Arc Force & Anti-Stick?
Downloads
EMMA - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The best general purpose rods I have used better than cigweld general purpose rods
16/12/24 20:15
Jamie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
I am a novice welder, i find them very easy to weld with
18/11/24 15:44
Eddy - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Performed great doing up some frames from painted RHS, solid beads even with some surface rust.
07/11/24 13:14
Shannon - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Been using these welding rods for years and I’ve had no problems with them, I couldn’t fault these and I would recommend them to anyone that asks about them, there the best that I’ve used and I would definitely buy more! 02/11/24 15:10
Brodan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
This is the third time I have brought this product and I am very happy with it , I always get smooth and clean strong welds
23/10/24 15:24
Ray - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Excellent welds using this product. Slag just peels off and we have found the weld strength is phenomenal. Would recommend this product to friends and colleagues in a heartbeat. Thank you weldclass. Regards, ray Thompson
10/10/24 11:54 AM
Peter - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
Good economical welding Rod, good strike, consistent burn.
09/08/24 08:01
Logan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The electrodes were very easy to strike and re-strike between welds and fed into the puddle nicely. The slag cleaned off well and the weld looked good after a quick wire-brush. Definitely my new favorite electrode, and will get them again.
26/09/24 6:05 PM
Michael - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The promax gp steel (2mm) is very nice 29/09/24 5:41 PM
Tyson - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Good rod easy to use
30/08/24 08:52
Adam - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Lays a beautiful weld, easy clean up and well the brand says it all. Great work Weldclass...
16/07/24 03:01
Barry - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Start well and flows well
11/07/24 12:09
Nicky - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The product has shown great result on the jobs I’m doing. They work a lot better than cigweld. They have shown better durability
09/07/24 10:08
Patrick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The Promax Gp Rods performed heaps better than the Cigweld rods. In all aspect of work. Truely happy with weldclass.
09/07/24 10:11
Sam - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Brilliant rods, easy as
03/07/24 12:39
Ash - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Easy to arc and leaves a nice finished weld
01/07/24 09:07
Douglas - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Easy to weld with leaves a clean finish. 17/06/24 13:42
Steven - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Good burn smooth and low perrosity.
30/05/24 23:50
Stan - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Good electrodes.
22/02/24 08:16
Laurie - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
I consider myself to be a pretty crappy welder, and I do not weld the best class of steel, but from my first use of the 2.0 mm rods on slightly rusty ( yes I did give it a quick clean) my results were way above my expectations. I welded 1inch gal pipe to a 2inch square tube for a good strong join.
12/01/24 16:51
Shau - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very good product great to start
18/12/23 15:22
Neil - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
My fabrication and welding skills are "OK", but I always seemed to struggle to get some welds done properly. This is the first time I have used these electrodes and it was much, much easier than the other electrodes I have used. They even make my welds look professional.
12/10/23 16:31
Nicholas - SA
likely would you be to recommend this product to a friend? (10 = very likely) = 7
Comments: Works well
03/09/23 15:52
Gary - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Would recommend the rods to all welding people as they work well
22/08/23 10:59
mark - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
having just built a tandem boat trailer using these rods in 3.2mm l can say that these rods are very easy to use, easy to start, the weld pool is easy to see watching the slag pushed back as l welded, most welds the slag peeled back as l welded
18/08/23 22:36
Brenton - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very smooth, easy to control
15/07/23 13:00
Eric - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: These rods are great they strike with no trouble and you get a very good weld.I am 77 years old and i like to keep my hand in
12/08/23 16:37
Dean - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very clean weld with them. No spattering slag spitting back at you. Excellent
14/08/23 15:37
Zakamya - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Just previously started using weldclass products and am absolutely stunned with the promax go steel welding electrodes. Takes about 95 amps with the stick welding I have been using but would love to get a weldclass welder but isn't available right now as it's just to much for me right now. Definitely recommend to friends, family and others that are looking for high quality products and stock for the workshop!
08/08/23 14:06
Stuart - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Awesome products very happy
22/05/23 10:28 AM
David - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
First tine using these great performance for good price
22/02/23 8:45 AM
Ireneo - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Pro max GP steel welding electrodes are very good to weld it doesn’t stick..
25/01/23 3:28 PM
Damien - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Worked really well for what i was doing
14/01/23 9:39 AM
Jacob - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great welding rods easy starting run smooth easy slag removal.
08/01/23 12:30 PM
Ryan - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: So much better then other electrodes i have used it the past. 100% recommend and buy again!!
29/12/22 11:38 AM
Dean - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excellent product to use, have changed from a previous product, easy to use with good results, my work place has changed to this product as well
14/11/22 10:21 AM
Michael - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I'm finding that these welding electrodes are out performing & out lasting all other brands I have used with my Weldmate 160.
27/10/22 5:27 PM
Neil - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Product enclosed in plastic holder and plastic wrap. This meant rods were dry and performed well. Good arc stability on metal with some slight rust and light galv coating. Weld presented well with easy clean up. (Slag came away clean). I will be looking for and buying these again if I can.
27/09/22 9:47 PM
Dean - TAS How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Excellent product, my preferred brand now 05/12/22 9:46 AM
Ken - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
These rods are easy to use and provide a great finish. These are the best rods I've ever used. 10/09/22, 8:50 am
Ian - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Weld and tack weld light steel easy with small welder that I have
05/09/22, 2:26 pm
Rodney - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I have a very old welder 15amp running on 10am supply. I previously have found Satin craft a good choice. These rods are much better easy to strike up, easy to maintain flow and good fill with poor match up. Best I have had in 29 years of welding with this welder.
28/08/22, 8:35 am
Tony - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Excellent product to use
20/08/22, 2:25 pm
Dean - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Great rod to weld with, rarely sticks, does high class welds. convenient casing for dry storage. 28/07/22, 5:27 pm
Jayden - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: This as easily one of the best rods I've used and I love how easily they strike and start an ach
25/07/21 9:44 PM
Jamie - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I’m only learning and these rods were perfect for getting a smooth run of weld
12/06/21 7:43 PM
Used this product before? We would love to get your comments... be the first to review!
Stephen - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excelant electrodes especially for new steel to used steel works well with the juice up higher than recomended fast freeze of weld and stop start and loves a gap
05/05/21 2:38 AM
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The best general purpose rods I have used better than cigweld general purpose rods
16/12/24 20:15
Jamie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
I am a novice welder, i find them very easy to weld with
18/11/24 15:44
Eddy - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Performed great doing up some frames from painted RHS, solid beads even with some surface rust.
07/11/24 13:14
Shannon - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Been using these welding rods for years and I’ve had no problems with them, I couldn’t fault these and I would recommend them to anyone that asks about them, there the best that I’ve used and I would definitely buy more! 02/11/24 15:10
Brodan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
This is the third time I have brought this product and I am very happy with it , I always get smooth and clean strong welds
23/10/24 15:24
Ray - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Excellent welds using this product. Slag just peels off and we have found the weld strength is phenomenal. Would recommend this product to friends and colleagues in a heartbeat. Thank you weldclass. Regards, ray Thompson
10/10/24 11:54 AM
Peter - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
Good economical welding Rod, good strike, consistent burn.
09/08/24 08:01
Logan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The electrodes were very easy to strike and re-strike between welds and fed into the puddle nicely. The slag cleaned off well and the weld looked good after a quick wire-brush. Definitely my new favorite electrode, and will get them again.
26/09/24 6:05 PM
Michael - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The promax gp steel (2mm) is very nice 29/09/24 5:41 PM
Tyson - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Good rod easy to use
30/08/24 08:52
Adam - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Lays a beautiful weld, easy clean up and well the brand says it all. Great work Weldclass...
16/07/24 03:01
Barry - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Start well and flows well
11/07/24 12:09
Nicky - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The product has shown great result on the jobs I’m doing. They work a lot better than cigweld. They have shown better durability
09/07/24 10:08
Patrick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
The Promax Gp Rods performed heaps better than the Cigweld rods. In all aspect of work. Truely happy with weldclass.
09/07/24 10:11
Sam - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Brilliant rods, easy as
03/07/24 12:39
Ash - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Easy to arc and leaves a nice finished weld
01/07/24 09:07
Douglas - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Easy to weld with leaves a clean finish. 17/06/24 13:42
Steven - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Good burn smooth and low perrosity.
30/05/24 23:50
Stan - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Good electrodes.
22/02/24 08:16
Laurie - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments:
I consider myself to be a pretty crappy welder, and I do not weld the best class of steel, but from my first use of the 2.0 mm rods on slightly rusty ( yes I did give it a quick clean) my results were way above my expectations. I welded 1inch gal pipe to a 2inch square tube for a good strong join.
12/01/24 16:51
Shau - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very good product great to start
18/12/23 15:22
Neil - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
My fabrication and welding skills are "OK", but I always seemed to struggle to get some welds done properly. This is the first time I have used these electrodes and it was much, much easier than the other electrodes I have used. They even make my welds look professional.
12/10/23 16:31
Nicholas - SA
likely would you be to recommend this product to a friend? (10 = very likely) = 7
Comments: Works well
03/09/23 15:52
Gary - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Would recommend the rods to all welding people as they work well
22/08/23 10:59
mark - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
having just built a tandem boat trailer using these rods in 3.2mm l can say that these rods are very easy to use, easy to start, the weld pool is easy to see watching the slag pushed back as l welded, most welds the slag peeled back as l welded
18/08/23 22:36
Brenton - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very smooth, easy to control
15/07/23 13:00
Eric - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: These rods are great they strike with no trouble and you get a very good weld.I am 77 years old and i like to keep my hand in
12/08/23 16:37
Dean - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very clean weld with them. No spattering slag spitting back at you. Excellent
14/08/23 15:37
Zakamya - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Just previously started using weldclass products and am absolutely stunned with the promax go steel welding electrodes. Takes about 95 amps with the stick welding I have been using but would love to get a weldclass welder but isn't available right now as it's just to much for me right now. Definitely recommend to friends, family and others that are looking for high quality products and stock for the workshop!
08/08/23 14:06
Stuart - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Awesome products very happy
22/05/23 10:28 AM
David - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
First tine using these great performance for good price
22/02/23 8:45 AM
Ireneo - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Pro max GP steel welding electrodes are very good to weld it doesn’t stick..
25/01/23 3:28 PM
Damien - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Worked really well for what i was doing
14/01/23 9:39 AM
Jacob - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great welding rods easy starting run smooth easy slag removal.
08/01/23 12:30 PM
Ryan - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: So much better then other electrodes i have used it the past. 100% recommend and buy again!!
29/12/22 11:38 AM
Dean - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excellent product to use, have changed from a previous product, easy to use with good results, my work place has changed to this product as well
14/11/22 10:21 AM
Michael - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I'm finding that these welding electrodes are out performing & out lasting all other brands I have used with my Weldmate 160.
27/10/22 5:27 PM
Neil - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Product enclosed in plastic holder and plastic wrap. This meant rods were dry and performed well. Good arc stability on metal with some slight rust and light galv coating. Weld presented well with easy clean up. (Slag came away clean). I will be looking for and buying these again if I can.
27/09/22 9:47 PM
Dean - TAS How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Excellent product, my preferred brand now 05/12/22 9:46 AM
Ken - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
These rods are easy to use and provide a great finish. These are the best rods I've ever used. 10/09/22, 8:50 am
Ian - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Weld and tack weld light steel easy with small welder that I have
05/09/22, 2:26 pm
Rodney - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I have a very old welder 15amp running on 10am supply. I previously have found Satin craft a good choice. These rods are much better easy to strike up, easy to maintain flow and good fill with poor match up. Best I have had in 29 years of welding with this welder.
28/08/22, 8:35 am
Tony - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Excellent product to use
20/08/22, 2:25 pm
Dean - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Great rod to weld with, rarely sticks, does high class welds. convenient casing for dry storage. 28/07/22, 5:27 pm
Jayden - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: This as easily one of the best rods I've used and I love how easily they strike and start an ach
25/07/21 9:44 PM
Jamie - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I’m only learning and these rods were perfect for getting a smooth run of weld
12/06/21 7:43 PM
Used this product before? We would love to get your comments... be the first to review!
Stephen - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Excelant electrodes especially for new steel to used steel works well with the juice up higher than recomended fast freeze of weld and stop start and loves a gap
05/05/21 2:38 AM
Related Products
-
Stick welding handpiece, twist-lock style for firm grip of the electrode.
-
Australia's number one Gasless (self-shielded) 'MIG' welding wire for welding without gas. PLATINUM GL-11® is the first choice of welders across Australia and beyond. Seriously smooth arc, easy-to-use, low spatter, low fume, easy de-slagging, multi-pass and all-positional. Great for mild and galvanised steels. E71T-11 classification. Available in 0.8mm, 0.9mm, 1.2mm, 1.6mm - 4.5kg and 15kg spools.
PLATINUM GL-11® wire is used and reviewed by thousands of Aussie welders every year, with an average rating of 9.67 out of 10. Click 'reviews' tab below to read feedback from other users. -
A seriously smooth and easy-to-use general-purpose electrode for welding steel. Platinum 12V welding rods are preferred by welders across Australia for their superior arc characteristics, all-position capability (including vertical down), low spatter and easy de-slagging. Great for mild and galvanised steel. Available in 2.0mm, 2.6mm (2.5mm) & 3.2mm. Specifications: AWS A5.1 E6013 / AS/NZS 4855 - B-E43 13 A.
Stick Electrode Selection Chart -
Now available with 7-year warranty. Portable electrode drying oven (welding rod hot box oven). Robust, lightweight, portable."Two models in one"... designed to suit users that are looking for either 5kg or 10kg capacity. If you only need 5kg capacity, the weight, size & portability is comparable to most 5kg ovens, but with the capacity to fit 10kg if required. If you need 10kg capacity, you'll find the new oven considerably lighter, more compact and more portable than many others on the market. Adjustable temperature 50-200c. Keeps electrodes moisture-free for optimum weld quality and electrode performance. Cylindrical shaped chamber keeps electrodes in better condition & avoids flux chipping (unlike Square shaped ovens where electrodes tend to roll from one corner to another and are more readily damaged). Click here to read about the design features of this oven in more detail.
-
Hydrogen controlled ("low hydrogen") E7016 series stick welding electrodes with a special Twin Flux Coating for superior arc stability - in Foil-Sealed 2KG Vacuum Packs. Commonly used for mild or high strength steel, where the joint requires higher strength than regular "GP" electrodes, such as highly restrained joints or components subject to higher load stress. Also used as a buffer layer prior to hard facing. 16XT welding rods are All-Positional (except for vertical down), easy striking & smooth running, with low spatter & easy slag removal. Available in 2.5mm, 3.2mm & 4.0mm. AWS A5.1 E7016 H8 & AS/NZS 4855: B E4916 A U H10 classifications.
Stick Electrode Selection Chart -
Now available with 7-year warranty, the 135ST is an incredibly compact Stick/MMA and DC Lift-Arc TIG welder with grunt, performance, and features that rivals much larger machines. Weighing only 2.3kg and fitted with a 10A 240V plug, it's super portable and versatile. Features include: 140 amps @ 20% output, 3m earth and work leads, shoulder strap and FREE welding gloves, adjustable hot start, adjustable arc force and optional VRD. Maximum electrode size capacity of 3.2mm.
Average rating of 9.41 out of 10, from hundreds of reviews. Click 'reviews' tab below to read feedback from other users. -
Now available with 7-year warranty.
A featherweight with heavyweight punch! The 180ST offers 180 amps output, whilst weighing just 4.5kg. Features include: Stick/MMA or DC Lift-Arc TIG function, LCD display, adjustable hot start & arc force, generator-friendly, optional VRD and much more. Comes with: 4m earth & stick leads, shoulder strap, cable strap to keep your leads tidy and a long 3m power input lead with 15A plug fitted. Runs electrodes up to 4.0mm.
*Also known as Weldforce 180ST - read more. -
Now available with 7-year warranty.
A real pocket rocket! Weighing only 4kg and fitted with a 10A 240V plug, the Force 140ST stick welder is super portable yet comes packed with some great features, including: Stick / MMA or DC Lift-Arc TIG function, 140 amps output, digital display, adjustable hot-start, adjustable arc-force, generator compatible, optional VRD and more. Comes with: 4m earth & stick leads, shoulder strap, cable strap and long 3m power input lead with 10A plug fitted. Easily runs electrodes up to 3.2mm.
*Also known as Weldforce 140ST - read more.
