Filler Rod - Steel S6
ER70S-6 grade filler wire for general purpose TIG welding of steel. Contains manganese and silicon deoxidizers. Good for poor fit-up and/or where impurities such as rust and scale are present. Also suitable for Oxy/Acetylene fusion welding of mild steel. Available in 1.6mm & 2.4mm in 1kg handy packs.
Brazing & TIG Rod Selection Guide
Brazing & TIG Rod Selection Guide
Disclaimer:
Any product application information on this web page is presented as "typical" and an indicative guide only, without guarantee or warranty, and Weldclass expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as an official recommendation for any welding condition or technique by Weldclass. The correct product(s), settings and techniques will vary in each application and users should conduct their own research to determine the correct product and method to use in their situation. E.&O.E.
WC-03782 47
KEY FEATURES:
- For general purpose TIG or OXY welding of steel
- Copper-coated, low-carbon steel rod
APPLICATION INFO:
- For general TIG welding or oxy/acetylene fusion welding of mild steels
- AWS Classification: A5.18 ER70S-6