TIG Welder - FORCE 201T* AC/DC Pulse

FUNCTIONS

• TIG (AC/DC)
• Stick / MMA

AT A GLANCE:

• 200A max output (AC) @ 30% duty cycle
• Weld up to 3.2mm (max tungsten size)
• Fitted with 15A 240V plug
• Professional TIG welding of Aluminium, Mild Steel, Stainless & more

 
KEY FEATURES:

• Market leading 7-year warranty*
• Weighs only 8kg - compact, robust & lightweight
• LCD Digital Controls
• IP23 Protection - superior resistance to moisture & particles
• Generator Compatible - min 8kva, ideal 10kva+
• Stressed-Tested - to 440V & over-specified componentry for reliability
• Optional Foot Control (part no WC-06236)

 
FUNCTIONS:

• HF or Lift Arc Ignition
• Pulse Frequency Adjustment 0.2 – 200Hz
• Pulse Width Adjustment
• Slope Up/Down Adjustments 0-10s
• Pre Gas Adjustment 0-2s
• Post-Gas Adjustment 0-10s
• AC Balance Adjustment: -5 (25% / max penetration) to +5 (50% / max cleaning)
• AC Frequency 50Hz

 
INCLUDES:

• TIG Torch #26 Flexi 8m (remote control)
• Earth Lead 4m
• Stick Lead 4m
• Gas Regulator
• Shoulder Strap
• Cable Strap
• Long Power Input Lead 3m
• Parts Kit & Tungstens - 1.6, 2.4, 3.2mm

 
OPTIONAL ACCESSORIES & COMMON SPARE PARTS:

• Foot Controller (part no WC-06236)
• T100 Welding Trolley (part no WC-06235)
• TIG Torch #17 150A (part no WC-06244) 
  Note machine is supplied as standard with #26 200A torch. If #17 torch is preferred, this should be ordered as a seperate item.
• TIG Torch #18 Water-Cooled (part no WC-01808) 
  Note machine is supplied as standard with #26 200A torch. If #18 torch is preferred, this should be ordered as a seperate item. Water-cooler unit required (not currently offered by Weldclass).
• TIG Torch Spares (26 series)
• Tungsten Electrodes

RELATED INFO & ARTICLES

• Warranty Registration
• What is an Inverter Welder (or plasma cutter)? About Inverter technology
• What is Duty Cycle & How is it Calculated?
• Using Generators to power inverter welders & plasma cutters
• What is TIG welding? About the TIG process
• TIG Welding: What is Scratch-Start, Lift-Arc and HF Ignition?

*Standard warranty 2 years, with extended 7 year warranty available if registered online after purchase, click here for details.

Welding Machine Selector Guide

Weldclass Welding and Plasma Cutting Machine Brochure

Weldclass Full Product Catalogue

,

Nick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
Good Screen is a bit hard to read (too small). Otherwise good.
29/10/24 14:52


Craig - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Seems to be a good unit.
03/10/24 10:53 AM


Justin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Weld made bit of equipment would highly recommend
11/08/24 14:18


Jared - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Easy to use, excellent production weld quality. 12/08/24 15:44


Jaymie - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Will be buying more welding supplies and tools for weldclass
02/06/24 14:54

Grant - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: i AM GETTING VERY POSITIVE FEED BACK FROM MY STAFF
01/02/24 08:36


Nicholas - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Great quality and duty cycle for price the extended warranty was a big selling point. Wish it came with clamps for the gas line though.
27/10/23 15:26




Nick - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
Very good welder for the price.
25/10/23 12:04

Wylie - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
I’ve just pulled it out of the box. More compact than expected (which is good). Looking forward to using it. 01/09/23 14:25

Nicolas - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Has been the best and easiest tig welder to use.
28/08/23 16:44

Lisa - QLD How
likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Great product
13/07/23 10:04

Dan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Excellent love the long lead and has heaps of grunt
17/07/23 13:08

Nondas - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Good performance out off small machine
03/08/23 10:10


Yolanda Antonacci - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Good service and product knowledge
27/07/23 12:42

David - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments: Good
24/07/23 15:54

Luke - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: It was easy to use and was easy to manage. I found it easy to answer the questions and upload the required documentation.
28/06/23 17:56

Chris - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: It a great compact unit just getting it all set up 06/04/23 8:04 AM

Chris - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Still mastering the unit but the hand piece to be able to adjust the amps is great
10/05/23 6:48 PM

Trevor - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Welds nicely
03/05/23 2:30 PM

Jake - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great product, very easy to use
17/04/23 9:40 AM

Seksaksit - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 7 Comments:
Very light weight and portable
18/02/23 11:08 PM

Frank - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Great unit to set up and use.
13/12/22 1:49 PM

Lee - TAS
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Great product so far!
11/12/22 9:03 PM

Garry - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: VG 01/11/22 5:09 PM

Wayne - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
Good service and knowledge of products
26/10/22 6:24 PM

Rob - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Amazing. Lightweight yet powerful and well built. Easy to set up and easy to use on everything from sheet metal to castings. Yet to try aluminium but I'm assured that this is a breeze too. 8 metre lead is a huge plus, as is the remote, flexible torch. Everything in this package is next level. Highly recommended, buy with confidence.
18/10/22 6:59 PM

Rob - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Amazing. Lightweight yet powerful and well built. Easy to set up and easy to use on everything from sheet metal to castings. Yet to try aluminium but I'm assured that this is a breeze too.
8 metre lead is a huge plus, as is the remote, flexible torch.
Everything in this package is next level. Highly recommended, buy with confidence.
18/10/22 00:59


Kyle - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its an immense full upgrade over the cheap one i was using
06/08/22 02:40


Brenton - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9 Comments:
The machine works great on aluminium and steel tig welding.
29/07/22, 9:18 am

Rex - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: user friendly and great value for money
25/07/22 16:31



"Jason - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
Excellent quality product did a lot of research before purchasing this product there is a lot of welders out there and this one suited our budget I look forward to powering up and testing.

07/07/22 00:50"


Nick - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great machine, very happy with it after the first few uses! 03/07/22 23:58

Bill - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: I've used Weldclass TIG , then I got to use a Weldforce AC/DC 201T with my work . I was impressed with the set up and how easy they are to tune to your preference and quality of welds that can be achieved especially on aluminium for such a small unit . I purchased a Weldforce AC/DC 201T based on my experience with one that my employer has , so as I haven't used my machine yet (only purchased today ) I look forward to getting good personal use out of it.
28/06/22 02:00

Hayden - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 5
Comments: Good
27/06/22 19:31


Chris - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great!
27/02/22 20:42

Maurice - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Looks great
30/08/21 4:38 PM

Cameron - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10 Comments:
Awesome machine, has improved my welding out of sight. Thanks weldforce
24/07/21 2:24 AM

James - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Clean easy to use compact size
21/07/21 9:27 PM

Dale - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: haven't used as of yet but quality seems good.
19/09/21 2:23 AM

Cameron - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I've been trying to teach myself to tig weld and a cheaply made Chinese welding machine was doing my head in. I ended up buying a weldforce 200amp acdc tig machine when my local tool shop had a sale. What a difference a quality machine makes. My welds (aluminium and stainless steel) improved dramatically instantly. Turns out that my technique wasn't to blame. Don't do your head in wasting your time with inferior equipment. Buy once, buy quality, buy weldforce.
02/08/21 04:49

Alan - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: very impressed, I am not a trade qualified welder but have put a lot of time into teaching myself from the basics to, with this machine, the more complex process of tig welding. the machine is easy to move and transport, the features for such a compact design i think are exceptional. the operating manual is clear and easy to understand. the process of set up also very easy to do. all in all i am happy with buying this machine. regards, Alan Johnson.
01/08/21 7:28 PM

Cameron - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments:
I've been trying to teach myself to tig weld and a cheaply made Chinese welding machine was doing my head in. I ended up buying a weldforce 200amp acdc tig machine when my local tool shop had a sale. What a difference a quality machine makes. My welds (alluminium and stainless steel) improved dramatically instantly. Turns out that my technique wasn't to blame. Don't do your head in wasting your time with inferior equipment. Buy once, buy quality, buy weldforce.
02/08/21 4:53 AM

Angus - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Incredibly versatile machine and excellent build quality! Super compact and loaded with all the features you require from a AC/DC Tig. I'm a big fan of how portable this machine is for site work and you can even run it off a 10amp outlet which is helpful. Everything has a high quality feel too it, I'm super impressed by the generous 8m leads and the leather protector is a nice touch also. Not only is this machine well suited for beginners due to it's easy set up and use but also for the industrial setting like what ours will be subject too. 10 out of 10 for me!
15/07/21 9:09 PM

Steven - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great service with a fair price Good guys
05/07/21 18:16


Darren - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: I only have this machine a day and have not properly tested it's full functionality. I was given a quick demonstration on some mild steel at the store I purchased it. All I have to say thus far is that it has a stable arc and bang for buck it's exactly what I'm looking for.
12/05/21 1:51 AM

Chris - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: I’ve been doing a lot of Aluminium welding. I really like the way you can dial down the amps on the hand piece. It’s a good bit of kit; once you get used to it. The welder it self; hasn’t missed a beat. The gas flow meter and hose are a bit dodgy but I just bought some BOC gear to sort that out. Cheers Chris Ferris
29-Mar-2021

Chris - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: It's compact , quite, simple to use and set up. It has every setting you require. The 15 amp plug has enough range and duty cycle for and light fabrication work on any weldable metals. The foot control is essential for small or spot welding. You will go a long way to find a better A/C HF TIG / stick welder.
15-Dec-2020

Campbell - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Coming from a Transtig 180 for the last 30 years, it's a complete transformation. Light, transportable, single phase and a superior welder in Tig mode. Led lights very bright in a indoor setting, makes control graphics hard to read.
10-Dec-2020

Andrew - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Excellent Machine, would highly recommend. A few minor points:
- I find the screen hard to read when setting up.
- There is no AC Frequency control, which is a feature present on other ac dc machines,
- The sales team at Trade Tools where I purchased the machines had very little knowledge and no experience of the machine.
07-Dec-2020

Hayden - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Very impressed with the size and weight of the machine compared to previously owned welders. The feel of the machine and accessories seem high quality, nice sheathing around tig torch lead and love the 8M lead. Works well on aluminium the only minor negative thing I have to say is the A/C balance is a setting of -5 to 5 unlike other machines I have used which express it as a percentage.
06-Dec-2020

Richard - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Very nice welder. Still trying to get my head around all the settings.
05-Dec-2020

Tony - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: This welder far exceeds my old machine. So compact and easy to use I now can tackle more intricate jobs with a lot less stress thanks for a great machine. Cheers
04-Dec-2020

Carl - QLD How likely would you be to recommend this product to a friend? (10 = very likely) = 8 Comments: easy set up and control panel,good duty cycle,good torch sraight out of the box,AC smooth and stable arc,small criticism led backing lights to bright to read function
04-Dec-2020

Noel - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Compact with easy details on how to set the machine also plenty of how to details found on WWW, have found the machine easy to use so far (has been 30 + yrs since I last did any tig welding but have found it very user friendly)
Would highly recommend this machine to anyone looking for a good quality for price Tig welder for home or workshop
01-Dec-2020

Jacob - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great product, user friendly interface with lots of great features out of the box .
The long leads make it great on site not having to move the unit all the time.
20-Nov-2020

Hayden - SA
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Great welder and very compact compared to my old machine, and also compared to the other possible machines i was considering purchasing. Really like the 8m torch lead and adjustability of welding amps on the handpiece. Also the sheathing over the torch lead seems very durable and the flexible section close to the torch with the articulation ball is a nice touch.
10-Nov-2020

Reade - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: THIS IS A GREAT MACHINE, ONLY THE HIGHEST QUALITY PARTS USED. AWESOME CONSTUMER SERVICE AS WELL
07-Oct-2020

Andrew - NSW
Did some experimenting with the pulse and it made a huge difference on light gauge material.
Very happy with the machine.
28-Aug-2020

Paul - QLD
I'm mostly retired now after 35 years of building aluminium boats but I still do a bit, if it's interesting.I do occasionally have people ask what is a good machine to buy. Sometimes I give tuition. I chose this machine on value rather than price. A good 8m torch, adequate leads, a quality flowmeter and a decent duty cycle. Also the 3 year warranty is appealing although I've never killed a tig machine yet, just upgraded when I see something I like.
About 1991 I bought the first Transtig 150 for $3000-00 which makes modern machines seem cheap. I've been using a Jasic 200P for the last 10 years until a mate made an offer on it.
I have only used the new one enough so far to just get used to it's control panel an general characteristics but I know it will do what I want better than the old one.
It's a pleasure to weld with and I would recommend this machine to anyone who asks.
16-Jun-2020

William - NSW
I am extremely happy with the machine.
Also the service representatives at Rocket Tools Port Macquarie were very helpful and co-operative.
19-May-2020

David - SA
only used it a little bit still learning with so far good
27-Apr-2020

Perry - QLD
Great, fantastic machine.
04-Feb-2020

Steven - NT
Complete beginner, never welded before in my life. Need to weld aluminium airconditioning pipes for jobs so purchased this to teach myself how to AC Tig. Very straight forward controls. Very user friendly. The team at total weld got me on the right track straight away, told me everything i need to know to get started. Very happy with the machine and sales service & will keep going back.
26-Jan-2020

Paul Meikle - QLD
I'm mostly retired now after 35 years of building aluminium boats but I still do a bit, if it's interesting.I do occasionally have people ask what is a good machine to buy. Sometimes I give tuition. I chose this machine on value rather than price. A good 8m torch, adequate leads, a quality flowmeter and a decent duty cycle. Also the 3 year warranty is appealing although I've never killed a tig machine yet, just upgraded when I see something I like. About 1991 I bought the first Transtig 150 for $3000-00 which makes modern machines seem cheap. I've been using a Jasic 200P for the last 10 years until a mate made an offer on it. I have only used the new one enough so far to just get used to it's control panel an general characteristics but I know it will do what I want better than the old one. It's a pleasure to weld with and I would recommend this machine to anyone who asks.
16-Jun-2020

Kevin Bohne - QLD
Many useful technology features
Very smooth welding output
29-Nov-2019

David Hawkins - NSW
great welder does a super job
26-Nov-2019

Peter Large - QLD
Only received it yesterday and set up today and tested ok so far
29-Oct-2019

Zeke Page - WA
Great machine, having fun learning a new skill, easy to navigate machine settings.
19-Oct-2019

Joshua Flavell - SA
happy so far, i have learned to weld on tig machines worth at least 5 times the price of the acdc inverter from weldclass, comparing to those i have been very impressed with the performance so far.
29-Jul-2019